ATXBlade.com
Blade Servers
PRODUCTS
SUPPORTS
LEARN
NEWS
RESOURCE
AB-105
Features Technical Specification Accessories Design Support
AB-110 Pictures

ATXBlade Processor Blade Unit

Microprocessor
  • Intel® Pentium® 4 Processor supporting 2.4G and 3.2GHz microprocessors
  • Supporting 533, and 800 MHz system bus speed
  • 1 MB L2 Advanced Transfer Cache
  • Integrated caches include 12-K micro-op trace cache and 8-KB L1 data cache in addition to L2 cache memory.
  • Featuring the Intel® NetBurst microarchitecture
  • Compatible with existing Intel® architecture-based software
  • Streaming SIMD Extensions 2 (SEE2) Instructions
  • 128-Bit Floating Point Port
Memory
  • Four 184-pin DDR SDRAM DIMM sockets
  • Support for DDR333 and DDR400 Non-ECC memory Support for up to 4GB of system memory
Chipset
  • Intel E7210 chipset
  • Winbond W83627HF LPC (Low Pin Count) /IO ASIC
Graphics and displays
  • ATI RAGE XL PCI controller 8 MB fram buffer
Network Interface
  • 1 x Integrated Intel 82547GI 10/100/1000 Mbits/sec Ethernet Lan connectivity (RJ-45)
  • 1 x Integrated Intel 82551QM device for 10/100 Mbits/sec Ethernet LAN connectivity (RJ-45)
Expansion Slots
  • One 32-bit 5V 33 Mhz PCI bus add-in card connector per ATXBLADE Unit
Peripherals Interface
  • Four USB 2.0 Ports (3 rear connectors and 1 headers)
  • Two 9-pin serial ports (one rear connector and one header)
  • One 25-pin ECP/EPP/SPP parallel port header
  • One PS2 Keyboard Port
  • One PS2 Mouse Port
  • Two Parallel ATA IDE interfaces with UDMA 33, ATA-66/100 support
  • Two SATA IDE interfaces support IDE RAID 0, 1, 0+1
  • One floppy disk drive interface

 

Hard Disk Drives
  • One Samsung SP1203C 120GB SATA-150 IDE hard drive 7200 RPM and 8 MB Cache memory x 2 unit (RADI 1 Configuration)
Internal Storage Bays
  • Two 3.5" internal hard drive bays
Floppy Drive
  • External USB Floppy Drive (Optional)
CD-ROM Drive Bay
  • External USB CD-ROM (Optional)
Power Supply
  • Line voltage: 100-240V AC. Voltage Auto sensing Power Supply.
  • Frequency: 50Hz to 60Hz, single phase
  • Maximum Wattage: 350 Watts
Environmental requirements
  • Operating temperature: 5° C to + 55° C
  • Storage temperature: -40° C to 70° C
  • Relative humidity: 5% to 95% non condensing
  • Maximum altitude: 10,000 feet

DDR Memory

 

System Configurations
Order Number AB105-2.4G-512MB-120GBI
AB105--3.2G-1GB-120GBI
Processor Intel Pentium 4 2.4GHz Intel Pentium 4 3.2GHz
L2 Cache
1M
Frontside Bus
533Mhz
800Mhz
Memory 512MB DDR400 Non-ECC SDRAM 1GB DDR400 Non-ECC SDRAM (512MB x 2)
On-Board Video
ATI RAGE XL PCI Graphic w/ 8 MB buffer
On-Board Network

One Intel Giga-bit Lan Controller and One Intel 10/100 Fast Ethernet Port

Hard Drive 1 (for Operating System) Samsung 120GB SATA 7200 RPM 8 MB Non-Removable IDE HD x 1 Unit Samsung 120GB SATA 7200 RPM 8 MB Non-Removable IDE HD x 1 Unit
Hard Drive 2 Samsung 120GB SATA 7200 RPM 8 MB Non-Removable IDE HD x 1 Unit Samsung 120GB SATA 7200 RPM 8 MB Non-Removable IDE HD x 1 Unit
USB Ports
8
Serial Ports
2 (1x9 Pin and 1 Header)
PCI Slots Available 1 PCI 1 PCI
Software Included Redhat 9 Operating System Pre Installed / No Media Redhat 9 Operating System Pre Installed / No Media
Limited Warranty and service 1 Year 1 Year
Customize system configuration
Price
$1146.00
$1469.00
Online Ordering (FAQ)
Availability
4 to 7 days
4 to 7 days
     

 

 

 

Home

Terms of Use

Privacy Policy

Contact Us

Copyright ©2003-2004 Rackmount.com, Inc. All rights reserved.
ATXBlade™ is a brand of Rackmount.com Inc.

Rackmount.com Inc. 134 Linden Avenue, Suite 200, Westbury, NY 11590 Tel: 516-997-5050 Fax: 516-997-5784